Hot Sales 1220*2440mm Solid Wood Finger Joint Board for South Korea

• After-sales Service: Online Technical Support
• Warranty: 5 Years
• Environmental Standard: E0
• Thickness: 8-10-12-15-16-17-18-20-22-24-30-40mm
• Spacing: ＜50mm
• Length: ≥250mm
• Model NO.: FJB-01
• Timber Type: Radiata Pine
• Usage: Indoor
• Burl: Without Burl
• Transport Package: Standard Export Pallet Package or as Client′s Requ
• Specification: 1220*2440mm, customized
• Origin: Shandong, China
• HS Code: 4403203000
• Production Capacity: 5000cbm/Month

Product Description

FINGER-JOINT Edge glued Radiata Pine Panel

Descripción

Solid single layer wooden board conformed by pieces of Radiata pine wood reduced longitudinally but assembled by the joint known as finger-joint enabling the wood to reach the length requested by the client. Afterwards, the pieces of wood are connected and glued together edge to edge and or on edge based on an aqueous dispersion-based adhesive of polyvinyl acetate.
The manufacturing process is completed by longitudinal cut of the piece to normalized length in addition to the item's sanding. The international term that used is the acronym SWP (S = solid; W = wood; P = panel).
WHAT ARE WE REFERRING TO WHEN WE TALK ABOUT "FINGER-JOINT" UNION?
Finger-joint joinery is the method of longitudinally joining two pieces of solid wood or material derived from it with high initial forces (self-locking), which are then glued, and which have a strong resistance to bending. It is applied is to manufacturing very long pieces of wood or to cutting knots or cracks that could reduce its stability and resistance (in fact, it is considered the most stable method). To sum up, the aim of the manufacturer is to glue short pieces of wood together to obtain a long material, the length of which can be endless. To see how it works, you simply have to interlock your fingers at a ninety degree angle (hence the name).

 

Appearance

A/A Grade: both faces are clear, free of knots. This is reason why the strip is cut into small pieces to afterwards join them together again along the longitudinal plane: the result is a completely clean board.

Names

• Scientific name:  Pinus Radiata D. Don
• Common name:  Radiata Pine

Physical Properties

• Grain:  Straight, except for rings close to the pith
• Texture:  Homogenous and fine
• Scent:  Slightly sappy
• Moisture content:  15 %
• Thermal conductivity:  0,104 λ (W/mK)
• Nominal density:  480 Kg/m3
• Permeability:  Retention > 240 kg/m3
• Shrinkage coefficient:  Volumétrica (14,5 %); Tangencial (7,4 %); Radial (4,2 %)
• Durability:  Category 3

Taxonomic Description of the Wood

• Domain:  Eukaryota
• Kingdom:  Plantae
• Division:  Pinophyta
• Class:  Pinopsida
• Order:  Pinales
• Family:  Pinaceae
• Genus:  Pinus
• Species:  Radiata

Mechanical Properties

• Janka Hardness:  3600 N
• Modulus of rupture:  825 Kg/cm²
• Modulus of elasticity:  80547 Kg/cm²
• Compression resistance:  360 Kg/cm²

Colour

• Alburnum: White - creamy
• Duramen: Light brown

Dimensions (measurement values are indicated in mm)

• Length: 2250 - 2200 - 2440 - 3000
• Width: 1220
• Thickness:  8 -10 - 12 - 16 - 18 - 22 - 25 - 30 - 40

Consult other measurements

Applications

In accordance with The Spanish Association of Standardisation, the edge glued Radiata pine panels are classified as follows:

• Regarding the conditions in which it is utilized: SWP (1= dry )
• Regarding its mechanical properties: SWP 1 NS (NS= non- structural, non-structural application)

Workability

• Cutting: Easy
• Drying: Fast
• Planing: Easy
• Gluing: Easy
• Nailing and screwing: Easy

Conservation and Storage

Our experience with Radiata pine and finger-joint panels made of this raw material allows us to know the possible modifications or damage that the product might suffer in the event that a series of recommendations regarding basic conservation and storage were not taken into consideration to preserve its durability and stability.
In wanting to avoid warping of the panel or edging of the strips that are at the edges we suggest the following recommendations:

• Do not subject the plank to sudden temperature and or moisture changes. Wood is sensitive to variations in the stability of the atmosphere surrounding it.
• Avoid storing the panels of wood in direct contact with floors and walls.
• Keep the original packaging, which were provided with the goods whether it be one by one or altogether, avoiding contact with the atmosphere for a prolonged period of time if the goods have not been rearranged or moved from the initial positioning - once the piece which is going to be put to use has been removed.
• Apply varnish, lacquer, paint or similar chemical treatment or equivalent that enhances the resistance of the panel/board and is not incompatible, in accordance with the fact sheet provided by the manufacturer, with the wood in itself or the adhesive used to glue.